Buick Century 1977, Electra 1977, Estate Wagon 1977, LeSabre 1977, Regal 1977, Riviera 1977, Skylark 1977; Cadillac DeVille 1977, Fleetwood 1977, Seville 1977; Chevrolet Camaro 1977, Caprice 1977, El Camino 1977, Impala 1977, Malibu 1977, Monte Carlo 1977, Nova 1977; GMC Sprint 1977; Oldsmobile 98 1977, Custom Cruiser 1977, Cutlass 1977, Cutlass Salon 1977, Cutlass Supreme 1977, Delta 88 1977, Omega 1977; Pontiac Bonneville 1977, Catalina 1977, Firebird 1977, Grand LeMans 1977, Grand Prix 1977, Laurentian 1977, LeMans 1977, Parisienne 1977, Phoenix 1977, Ventura 1977
Engineered to meet or exceed O.E. performance.
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Zinc plating offers a silver O.E.-like finish.
Ideal for commercial use as well as performance vehicles.
Every unit is 100% tested to ensure reliable performance.
No core return required.
Precision machined heat treated center shafts.
Includes necessary mounting hardware (where applicable)
Documents
Attributes
Product Condition: | Remanufactured |
FAQs: | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
Features and Benefits: | Pistons are durable, resistant to cracking or pitting and handle great loads. |
Features and Benefits: | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
FAQs: | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer's recommendations. |
Features and Benefits: | Mounting bracket is included where applicable for a hassle-free installation. |
FAQs: | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAQs: | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
Features and Benefits: | Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish. |
FAQs: | Car pulls to one side during braking. Why? |
Features and Benefits: | New banjo bolts are included where applicable to ensure a perfect fit and quick installation. |
Features and Benefits: | New bleeder screws provide trouble-free bleeding and a positive seal. |
FAQs: | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
FAQs: | Brakes squeal all of the time. What's causing the squeal? |
Features and Benefits: | New washers are included where applicable for a proper seal. |
Features and Benefits: | A plastic cap plug protects every brake port thread to ensure trouble-free installation. |
FAQs: | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
FAQs: | Could calipers be the cause of a low brake pedal? |
Features and Benefits: | New stainless steel hardware clips and new mounting pins are included where applicable. |
Features and Benefits: | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
FAQs: | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
FAQs: | What type of grease is used on floating caliper mounting pins? |
Features and Benefits: | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
FAQs: | A silicone grease is used on floating caliper mounting pins. |
FAQs: | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAQs: | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Brake Caliper Finish: | Oil Emulsion |
Piston Quantity: | 1 |
Caliper Color: | Gray |
Installation Hardware Included: | YES |
Package Contents: | Caliper; Hardware Kit |
Piston Material: | Steel |
Piston Size (OD) (in): | 2.935 |
Piston Size (OD) (mm): | 74.549 |
Pads Included: | NO |
Mounting Bolts Included: | Yes |
E-Waste: | NO |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00082617010535Package Bar Code:00082617010535Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Canadian Harmonizing Tariff Code:8708309920Country of Origin (Primary):USEmission Code:Legal USHarmonized Tariff Code (HTS):8708305090Harmonized Tariff Code (Schedule B):8708300050Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:43MSDS Required Flag:NoPallet Layer Maximum:4Remanufactured Part:YesWarranty Distance:24000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:24Warranty Time UOM:Month
Interchange
Oldsmobile:18003760Pontiac:18003760