Chrysler Imperial 1975-74, New Yorker 1978-74, Newport 1978-74, Town & Country 1977-74; Dodge B100 1980-78, B150 1994-81, B1500 1998-95, B200 1980-78, B250 1994-81, B2500 1998-95, B300 1980-78, B350 1994-81, B3500 1998-95, CB300 1980-78, D100 1989-84 1979-78, D150 1993-78, D200 1980-78, D250 1993-81, D300 1980-78, D350 1993-81, D400 1981-78, D450 1981-78, Monaco 1976-74, R400 1974, Ram 1500 Van 1998-95, Ram 2500 Van 1998-96, Ram 3500 Van 1998-96, Ramcharger 1993-74, RD200 1980-78, Royal Monaco 1977-75, W100 1989-84 1977-75, W100 Pickup 1974, W150 1993-77, W200 1980-75, W250 1993-81, W350 1989-81; Plymouth Fury 1974, Fury I 1974, Fury II 1974, Fury III 1974, Gran Fury 1977-75, PB100 1980-78, PB150 1983-81, PB200 1980-78, PB250 1983-81, PB300 1980-78, PB350 1983-81, Trailduster 1981-74
Engineered to meet or exceed O.E. performance.
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Zinc plating offers a silver O.E.-like finish.
Ideal for commercial use as well as performance vehicles.
Every unit is 100% tested to ensure reliable performance.
No core return required.
Precision machined heat treated center shafts.
Includes necessary mounting hardware (where applicable)
Documents
Attributes
Product Condition: | Remanufactured |
FAQs: | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
Features and Benefits: | Pistons are durable, resistant to cracking or pitting and handle great loads. |
Features and Benefits: | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
FAQs: | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer's recommendations. |
Features and Benefits: | Mounting bracket is included where applicable for a hassle-free installation. |
FAQs: | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAQs: | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
Features and Benefits: | Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish. |
Features and Benefits: | New banjo bolts are included where applicable to ensure a perfect fit and quick installation. |
FAQs: | Car pulls to one side during braking. Why? |
Features and Benefits: | New bleeder screws provide trouble-free bleeding and a positive seal. |
FAQs: | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
Features and Benefits: | New washers are included where applicable for a proper seal. |
FAQs: | Brakes squeal all of the time. What's causing the squeal? |
FAQs: | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
Features and Benefits: | A plastic cap plug protects every brake port thread to ensure trouble-free installation. |
Features and Benefits: | New stainless steel hardware clips and new mounting pins are included where applicable. |
FAQs: | Could calipers be the cause of a low brake pedal? |
Features and Benefits: | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
FAQs: | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
FAQs: | What type of grease is used on floating caliper mounting pins? |
Features and Benefits: | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
FAQs: | A silicone grease is used on floating caliper mounting pins. |
FAQs: | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAQs: | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Brake Caliper Finish: | Oil Emulsion |
Piston Quantity: | 1 |
Caliper Color: | Gray |
Installation Hardware Included: | YES |
Package Contents: | Caliper; Hardware Kit |
Piston Material: | Steel |
Piston Size (OD) (in): | 3.1 |
Piston Size (OD) (mm): | 78.74 |
Pads Included: | NO |
Mounting Bolts Included: | NO |
E-Waste: | NO |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00082617061506Package Bar Code:00082617061506Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Canadian Harmonizing Tariff Code:8708309920Country of Origin (Primary):USEmission Code:Legal USHarmonized Tariff Code (HTS):8708305090Harmonized Tariff Code (Schedule B):8708300050Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:35MSDS Required Flag:NoPallet Layer Maximum:7Remanufactured Part:YesWarranty Distance:24000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:24Warranty Time UOM:Month
Interchange
Chrysler:3699893Chrysler:4037969Dodge:3699893Dodge:4030435Dodge:4032969Dodge:4037969Dodge:4213137Dodge:4313391Plymouth:3699893Plymouth:4030435Plymouth:4037969Plymouth:4213137