CARDONE New 74-10000 Mass Air Flow Sensor

Brand:CARDONE New Part Number:74-10000 Category:Mass Air Flow Sensor Medium Description: Short Description: SKU:51386969 Availability:0 Candid0 DC Manufactured in:United States

Nissan 200SX 1988-87, Maxima 1987-85

CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go \"above and beyond\" the average brake caliper.
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Mounting bracket is included where applicable for a hassle-free installation.
Pistons are durable, resistant to cracking or pitting and handle great loads.
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
New bleeder screws provide trouble-free bleeding and a positive seal.
New washers are included where applicable for a proper seal.
A plastic cap plug protects every brake port thread to ensure a trouble free installation.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Attributes

Product Condition:
Remanufactured
FAQs:
How can a malfunctioning MAF/VANE AIRFLOW sensor affect my vehicles' operation?
Features and Benefits:
100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
FAQs:
A malfunctioning MAF/VANE AIRFLOW sensor can cause any one or more of the following symptoms: hesitation, stalling, poor fuel economy or poor engine performance.
Features and Benefits:
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
FAQs:
How can I determine if the MAF/VANE AIRFLOW sensor is bad?
Features and Benefits:
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
FAQs:
Visually inspect the sensor element in the MAF for damage or for a burnt smell. In the VANE AIRFLOW sensor, inspect the door for binding or for a burnt smell. unit. Start the engine and tap lightly on the unit. If tapping causes an engine malfunction or intermittent operation the unit is faulty and must be replaced.
Features and Benefits:
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle's engine control management system.
FAQs:
What are the most common causes of MAF/VANE AIRFLOW sensor problems?
Features and Benefits:
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
FAQs:
Over-voltage sources from relays, shorted wiring, cracked printed circuit boards, moisture entering the unit through split air ducts, electrical connections and wiring, air intake obstructions or gas/oil fumes from the engine can cause failure. Check air filter and air ways for dirt or debris. Check for loose or faulty connectors, broken or faulty wiring. Be sure to check these to prevent damage to the replacement unit.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
FAQs:
What goes bad in VANE AIRFLOW type units?
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
FAQs:
The most common causes are: worn vane assembly, cracked housing, or cracked printed circuit board. These conditions require unit replacement.
FAQs:
What goes bad in MAF sensors?
FAQs:
The most common causes are: cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating, or loose printed circuit board components.
Mounting Hole Quantity:
4
Mounting Type:
BOLT-ON
Housing Included:
YES
Housing Color:
Gray
Housing Material:
ALUMINUM
Package Contents:
Mass Air Flow Sensor, Instruction Sheet
E-Waste:
Yes

Package Information

Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00082617177658Package Bar Code:00082617177658Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0

Extended Information

Canadian Harmonizing Tariff Code:9026800000Country of Origin (Primary):USEmission Code:Legal USHarmonized Tariff Code (HTS):9026802000Harmonized Tariff Code (Schedule B):9026800000Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:96MSDS Required Flag:NoPallet Layer Maximum:3Remanufactured Part:YesWarranty Distance:18000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:12Warranty Time UOM:Month

Interchange

Nissan:2268016E10Nissan:2268032F00Nissan:2268042E00Nissan:A36000E20Nissan:A36000J05
Vehicle Applications
YearsMakeModelTrimEngineDriveNotes