LuK: Don't gamble - stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous - from increased wear of engine mounts through gearbox failure to damaged crankshafts.
Audi 90 1993-1995 (V6, 2.8L), Audi 90 Quattro 1993-1995 (V6, 2.8L), Audi A4 1996-1997 (V6, 2.8L), Audi A4 Quattro 1996-1997 (V6, 2.8L), Audi A6 Quattro 1995-1998 (V6, 2.8L)
Documents
Attributes
Bolt Hole Pattern: | 2 |
Dowel Hole Pattern: | 5 |
Has Dowel Pins: | with Dowel Pins |
Number of teeth, starter ring gear: | 135 |
Number of mounting bores: | 24 |
Ring Gear Number: | L-01180-0030-01 |
Dowel hole diameter: | 0.2362 inch |
Flywheel Thickness [mm]: | 1.6339 inch |
I.D. for Pilot: | 0.9449 inch |
Overall Casting O.D.: | 11 inch |
Ring Gear Major Dia.: | 11.3924 inch |
Ring Gear To Friction Surface: | 1.6339 inch |
Torque Capacity Limiter: | 13.1102 inch |
Bolt hole PCD crankshaft: | 2.6772 inch |
Cup depth, secondary flywheel: | 0.1063 inch |
Centering diameter / dowel hole: | 10.4331 inch |
Crank To Friction Surface: | 1.4921 inch |
Flywheel Friction Surface Inner diameter: | 6.0236 inch |
Flywheel friction surface outer diameter: | 10.1575 inch |
Ring Gear Mounting O.D.: | 10.2787 inch |
Torque Capacity DMFW: | 12.5984 inch |
Bolt hole PCD clutch pres.plte: | 10.4331 inch |
Crank Hole Dia.: | 0.4055 inch |
Ring Gear Thickness: | 0.3937 inch |
Bolt hole PCD crankshaft: | 68 mm |
Crank To Friction Surface: | 37.9 mm |
Flywheel Thickness [mm]: | 41.5 mm |
Bolt hole PCD clutch pres.plte: | 265 mm |
Crank Hole Dia.: | 10.3 mm |
Dowel hole diameter: | 6 mm |
Flywheel Friction Surface Inner diameter: | 153 mm |
Overall Casting O.D.: | 279.4 mm |
Ring Gear Major Dia.: | 289.366 mm |
Ring Gear Thickness: | 10 mm |
Flywheel friction surface outer diameter: | 258 mm |
Ring Gear To Friction Surface: | 41.5 mm |
Torque Capacity DMFW: | 320 mm |
Torque Capacity Limiter: | 333 mm |
Centering diameter / dowel hole: | 265 mm |
Cup depth, secondary flywheel: | 2.7 mm |
I.D. for Pilot: | 24 mm |
Ring Gear Mounting O.D.: | 261.08 mm |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Country of Origin (Primary):DEEmission Code:Legal USHarmonized Tariff Code (HTS):8483508080Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderStock Status:Shelf StockWarranty Special:12 months or 12,000 miles - whichever comes first
Interchange
Audi:078 105 266 D